Installation

WIPER / WASHER: WASHER MOTOR (for Front Side): INSTALLATION

1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

(a) Install the windshield washer motor and pump assembly.

(b) Connect the connector.





(c) Connect the washer hose.

2. ADD WASHER FLUID

(a) Add washer fluid to the washer jar.

3. INSTALL FRONT FENDER LINER RH

(a) Install new 2 grommets and the 3 screws.

(b) Install the 9 clips.

(c) Install the pin hold clip as shown in the illustration.





Text in Illustration





NOTICE:
Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

4. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY RH

HINT
Use the same procedure as for the LH side .

5. INSTALL FRONT WHEEL RH Installation