Installation

2ZR-FXE EMISSION CONTROL: CANISTER: INSTALLATION

1. INSTALL CHARCOAL CANISTER WITH BRACKET ASSEMBLY

(a) Install the charcoal canister with bracket assembly and engage the claw.

(b) Install the nut.

Torque : 19 Nm (194 kgf-cm, 14 ft-lbf)

2. INSTALL CHARCOAL CANISTER ASSEMBLY

(a) Install the charcoal canister assembly with the 3 bolts and guide.

Torque : 19 Nm (194 kgf-cm, 14 ft-lbf)

(b) Push in the tube connector to the pipe and push up the retainer to connect the vent line tube.





Text in Illustration





NOTICE:
* Check that there are no scratches or foreign matter around the connected part of the tube connector and pipe before performing this work.
* After connecting the vent line tube, check that the vent line tube is securely connected by pulling on the tube connector and the charcoal canister.

(c) Push in the tube connector to the pipe and push up the retainer to connect the fuel tank vent hose.





Text in Illustration





NOTICE:
* Check that there are no scratches or foreign matter around the connected part of the tube connector and pipe before performing this work.
* After connecting the fuel tank vent hose, check that the fuel tank vent hose is securely connected by pulling on the tube connector and the charcoal canister.

(d) Connect the purge line hose.

(e) Connect the air line tube.

NOTICE:
* Check that there are no scratches or foreign matter around the connected part of the tube connector and pipe before performing this work.
* After connecting the air line tube, check that the air line tube is securely connected by pulling on the tube connector and the charcoal canister.

(f) Connect the 3 wire harness clamps and connector.