Removal

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER: REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Service Precautions.

2. DISCONNECT ROOF HEADLINING ASSEMBLY

Removal

3. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE TIRE PRESSURE WARNING RECEIVER ASSEMBLY

NOTICE:
Do not damage the roof headlining assembly.

(a) Remove the bolt.





(b) Disengage the 2 tabs from the holes to remove the tire pressure warning receiver assembly.

(c) Disconnect the connector from the tire pressure warning receiver assembly.