Installation

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY

NOTICE:
Do not damage the roof headlining assembly.

(a) Connect the connector to the tire pressure warning receiver assembly.

(b) Engage the 2 tabs into the holes to temporarily install the tire pressure warning receiver assembly.

(c) Install the bolt.

Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

2. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. CONNECT ROOF HEADLINING ASSEMBLY

Installation

4. INSPECT TIRE PRESSURE WARNING SYSTEM

Test Mode Procedure