Installation

LIGHTING (EXT): HIGH MOUNTED STOP LIGHT ASSEMBLY: INSTALLATION

1. INSTALL CENTER STOP LIGHT SET

(a) Secure the wire running through the rear spoiler assembly to the center stop light set wire harness.

(b) Pull the wire to pass the center stop light set wire harness through the spoiler.

NOTICE:
Do not apply excessive force when pulling the wire harness or it may break.

(c) Install the center stop light set with the 2 screws to the rear spoiler assembly.

Torque : 1.0 Nm (10 kgf-cm, 9 in-lbf)

(d) Remove the wire from the center stop light set wire harness.

(e) Connect the connector.

2. INSTALL BACK DOOR CENTER GARNISH Reassembly