Installation

LIGHTING (INT): REAR DOOR COURTESY SWITCH: INSTALLATION

1. INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY

(a) Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the bolt.





Torque : 6.3 Nm (64 kgf-cm, 56 in-lbf)

(b) Connect the connector.

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side) Installation

3. INSTALL TONNEAU COVER HOLDER CAP (for LH Side) Installation

4. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side) Installation

5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side) Installation

6. INSTALL TONNEAU COVER HOLDER CAP (for RH Side)

HINT
Use the same procedure described for the LH side.

7. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)

HINT
Use the same procedure described for the LH side.

8. INSTALL REAR SIDE SEATBACK ASSEMBLY LH (for LH Side) Installation

9. INSTALL REAR SIDE SEATBACK ASSEMBLY RH (for RH Side)

HINT
Use the same procedure described for the LH side.

10. INSTALL REAR SEAT CUSHION ASSEMBLY Installation

11. INSTALL REAR DECK TRIM COVER Installation

12. INSTALL DECK TRIM SERVICE HOLE COVER Installation

13. INSTALL REAR NO. 1 FLOOR BOARD Installation

14. INSTALL REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY Installation

15. INSTALL REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY Installation

16. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Installation

17. INSTALL DECK FLOOR BOX LH (for LH Side) Installation

18. INSTALL REAR NO. 4 FLOOR BOARD (for LH Side) Installation

19. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP Installation

20. INSTALL REAR DOOR SCUFF PLATE Installation

21. INSTALL REAR NO. 3 FLOOR BOARD (for RH Side) Installation

22. INSTALL REAR DECK FLOOR BOX Installation

23. INSTALL REAR NO. 2 FLOOR BOARD (for Separate Type) Installation