Installation

LIGHTING (INT): FRONT DOOR COURTESY SWITCH: INSTALLATION

1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY

(a) Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the bolt.





Torque : 6.3 Nm (64 kgf-cm, 56 in-lbf)

(b) Connect the connector.

2. INSTALL CENTER PILLAR LOWER GARNISH Installation

3. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP Installation

4. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP Installation

5. INSTALL REAR DOOR SCUFF PLATE Installation

6. INSTALL FRONT DOOR SCUFF PLATE Installation