Reassembly

METER / GAUGE / DISPLAY: HEADUP DISPLAY: REASSEMBLY

1. INSTALL NO. 2 COMBINATION METER MIRROR CASE

2. INSTALL COMBINATION DISPLAY

(a) Connect the connector and install the No. 2 combination meter mirror wire to the combination display as shown in the illustration.





(b) Install the combination display with the 3 screws.





3. INSTALL COMBINATION METER MIRROR ECU

(a) Connect the connector to install the combination meter mirror ECU as shown in the illustration.





4. INSTALL NO. 2 COMBINATION METER MIRROR WIRE

(a) Connect the connector to install the No. 2 combination meter mirror wire.





(b) Engage the 2 guides as shown in the illustration.





NOTICE:
Make sure that the combination meter mirror wire is in the combination display case as shown in the illustration.

Text in Illustration





(c) Engage the 3 clamps.





5. INSTALL NO. 2 COMBINATION METER MIRROR PLATE

(a) Engage the 2 guides.





(b) Install the No. 2 combination meter mirror plate with the 4 screws.

6. INSTALL NO. 2 COMBINATION METER MIRROR

(a) Install the No. 2 combination meter mirror as shown in the illustration.





7. INSTALL NO. 1 COMBINATION METER MIRROR PLATE

(a) Engage the 2 claws to install the No. 1 combination meter mirror plate as shown in the illustration.





8. INSTALL COMBINATION METER MIRROR

(a) Install the combination meter mirror with the 2 screws.





(b) Connect the connector.

9. INSTALL NO. 1 COMBINATION METER MIRROR CASE

(a) Engage the 3 claws.





(b) Install the No. 1 combination meter mirror case with the 2 screws.

10. INSTALL COMBINATION METER MIRROR GLASS

(a) Install the combination meter mirror glass with the 3 screws.