Installation

HYBRID / BATTERY CONTROL: WATER PUMP WITH MOTOR: INSTALLATION

1. INSTALL INVERTER WATER PUMP ASSEMBLY

(a) Install the inverter water pump assembly and water pump bracket with the 3 bolts.





Torque : 6.1 Nm (62 kgf-cm, 54 in-lbf)

(b) Connect the 2 water hoses and connector.





Text in Illustration





NOTICE:
* Do not remove the pieces of cloth from the pipes and disconnected hoses until installation to prevent foreign matter from entering the inverter water pump and cooling system.
* Connect the water hoses securely up to the rib of the inverter water pump assembly.
* Make sure to align the alignment marks of the hoses with the ribs of the inverter water pump assembly.
* Make sure that the clip is positioned as shown in the illustration.

2. INSTALL INVERTER TRAY BRACKET Installation

3. INSTALL INVERTER RESERVE TANK ASSEMBLY Installation

4. INSTALL INVERTER WITH CONVERTER ASSEMBLY

HINT
Installation.

5. ADD COOLANT (for Inverter) Coolant (for Inverter)

6. INSPECT FOR COOLANT LEAK (for Inverter) Testing and Inspection

7. INSTALL NO. 1 ENGINE UNDER COVER

8. INSTALL FRONT SPOILER COVER (w/ Front Spoiler)

9. INSTALL ENGINE UNDER COVER (w/ Cover)