Reassembly

EXTERIOR PANELS / TRIM: FRONT BUMPER: REASSEMBLY

1. INSTALL FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH

(a) Engage the guide and install the front side member bracket sub-assembly LH.





(b) Install the 4 bolts.

Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)

2. INSTALL FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side.

3. INSTALL FRONT BUMPER SIDE SUPPORT LH

(a) Engage the 2 claws and install the front bumper side support LH.





Text in Illustration





(b) Install the bolt and screw.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

4. INSTALL FRONT BUMPER SIDE SUPPORT RH

HINT
Use the same procedure for the RH side and LH side.

5. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

(a) Engage the claw.





(b) Install the front bumper reinforcement sub-assembly with the 6 bolts.

Torque : 34 Nm (347 kgf-cm, 25 ft-lbf)

(c) Engage the 7 clamps.

6. INSTALL FRONT BUMPER ENERGY ABSORBER

(a) Engage the 2 guides to install the front bumper energy absorber.





7. INSTALL NO. 1 LOWER RADIATOR GRILLE

(a) Engage the 20 claws to install the No. 1 lower radiator grille.





(b) Install the 2 outside moulding retainers.

8. INSTALL NO. 2 LOWER RADIATOR GRILLE

(a) Engage the pin and 5 claws, and install the No. 2 lower radiator grille.





(b) Install the 2 screws.





9. INSTALL FRONT BUMPER HOLE COVER LH

(a) Engage the hook.





Text in Illustration





(b) Engage the 3 claws and install the front bumper hole cover LH.

10. INSTALL FRONT BUMPER HOLE COVER RH

HINT
Use the same procedure for the RH side and LH side.

11. INSTALL FRONT FENDER LINER RETAINER

(a) Engage the claw and install the front fender liner retainer.





HINT
Use the same procedure for the RH side and LH side.

12. INSTALL RADIATOR GRILLE EMBLEM ASSEMBLY

(a) Engage the 2 pins and 4 claws, and install the radiator grille emblem assembly.





(b) Install the 2 screws.

Torque : 3.0 Nm (31 kgf-cm, 27 in-lbf)

13. INSTALL RADIATOR GRILLE

(a) Engage the 12 claws and install the radiator grille.





(b) Install the 4 clips.





14. INSTALL HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)

(a) Engage the 8 clamps and install the headlight cleaner hose.





15. INSTALL ENGINE ROOM NO. 3 WIRE

(a) w/o Fog Light:

(1) Engage the 7 clamps to install the engine room No. 3 wire.





(b) w/ Fog Light:

(1) Engage the 9 clamps to install the engine room No. 3 wire.





16. INSTALL HOOD TO FRONT END PANEL SEAL

(a) Engage the 2 clips and install the new hood to front end panel seal.





Text in Illustration





(b) Install the clip.

17. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET

(a) Engage the 2 claws.





(b) Install the front bumper extension mounting bracket with the 2 screws.

18. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light) Installation

19. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT
Use the same procedure for the RH side and LH side.

20. INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY LH (w/o Daytime Running Light) Installation

21. INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY RH (w/o Daytime Running Light)

HINT
Use the same procedure for the RH side and LH side.

22. INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY LH (w/ Daytime Running Light) Installation

23. INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY RH (w/ Daytime Running Light)

HINT
Use the same procedure for the RH side and LH side.

24. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System) Installation

25. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

HINT
Use the same procedure for the RH side and LH side.

26. INSTALL HEADLIGHT CLEANER WASHER NOZZLE COVER (w/ Headlight Cleaner System) Installation