Maintenance Indicator Reset

Reset the Maintenance Data (U.S.A. only)
After the required maintenance is performed according to the maintenance schedule, please reset the maintenance data.
To reset the data, follow the procedures described below:

Step 1
Vehicles without a smart key system
Switch the display to the odometer and then turn the engine switch off.
Vehicles with a smart key system
Switch the display to the odometer and then turn the "POWER" switch off.

Step 2
Vehicles without a smart key system
Turn the engine switch to the "ON" position. The multi-information display's initial screen will be displayed for a few seconds. While the initial screen is being displayed, press the "TRIP" steering switch 3 times, pressing and holding the switch on the third time.
Vehicles with a smart key system
Turn the "POWER" switch to ON mode. The multi-information display's initial screen will be displayed for a few seconds. While the initial screen is being displayed, press the "TRIP" steering switch 3 times, pressing and holding the switch on the third time.

Step 3
Continue to press and hold the button until the trip meter displays "000000".