Installation

LIGHTING (EXT): HEIGHT CONTROL SENSOR: INSTALLATION

1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

(a) Engage the clamp.

(b) Install the rear height control sensor sub-assembly with the 2 bolts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(c) Install the nut.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(d) Connect the connector.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. INITIALIZE HEIGHT CONTROL SENSOR SIGNAL

Initialization

4. ADJUST HEADLIGHT AIMING

Adjustments