Removal

2GR-FE ENGINE CONTROL: VACUUM SWITCHING VALVE (for Engine Mounting): REMOVAL

1. PRECAUTION

NOTICE:
After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (- ) battery terminal notices before proceeding with work Service Precautions.

2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

3. REMOVE ENGINE UNDER COVER RH

4. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

5. REMOVE ENGINE UNDER COVER LH

6. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. REMOVE DUTY VACUUM SWITCHING VALVE

(a) Disconnect the 2 vacuum hoses from the duty vacuum switching valve.





(b) Disconnect the hose.

(c) Remove the bolt and disconnect the duty vacuum switching valve connector.





(d) Disconnect the vacuum hose to remove the duty vacuum switching valve.