Installation

2GR-FE ENGINE CONTROL: VACUUM SWITCHING VALVE (for Engine Mounting): INSTALLATION

1. INSTALL DUTY VACUUM SWITCHING VALVE

(a) Connect the vacuum hose and vacuum switching valve connector.





(b) Install the duty vacuum switching valve with the bolt.

HINT
Hose A: Large hose

Torque : 4.0 Nm (41 kgf-cm, 35 in-lbf)

(c) Connect the 2 vacuum hoses to the duty vacuum switching valve.





HINT
Hose B: Dummy hose (not used for ventilation, the other end is plugged)

(d) Connect the hose.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. INSTALL ENGINE UNDER COVER LH

4. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

5. INSTALL ENGINE UNDER COVER RH

6. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH