C1AB6

PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: C1AB6: Blind Spot Monitor Master Module
C1AB6 - Blind Spot Monitor Master Module

DESCRIPTION

This DTC is stored when the blind spot monitor sensor RH detects an internal malfunction.





INSPECTION PROCEDURE

NOTICE:
When checking for DTCs, make sure that the blind spot monitor main switch (warning canceling switch assembly) is on.

PROCEDURE

1. CHECK DTC

(a) Clear the DTCs Blind Spot Monitor System.

(b) Recheck for DTCs and check if the same DTC is output again.

OK:

No DTCs are output.

NG -- REPLACE BLIND SPOT MONITOR SENSOR RH

OK -- USE SIMULATION METHOD TO CHECK How To Proceed With Troubleshooting