Installation

U760E AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: INSTALLATION

1. INSTALL TRANSMISSION WIRE

(a) Install the transmission wire onto the transmission valve body assembly with the bolt and lock plate.

Torque : 11 Nm (110 kgf-cm, 8 ft-lbf)

(b) Coat the temperature sensor with ATF.

(c) Connect the temperature sensor onto the transmission valve body assembly with the bolt and lock plate.

Torque : 11 Nm (110 kgf-cm, 8 ft-lbf)

(d) Engage the clamp and connect the transmission wire.

(e) Connect the 7 connectors of the shift solenoid valve.

(f) Connect the connector of the transmission revolution sensor.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

Installation