Installation

STEERING COLUMN: STEERING PAD SWITCH (for 4 Spoke): INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY

(a) Engage the claw and 2 pins to install the steering pad switch assembly (RH side) to the steering wheel sub-assembly.

(b) Install the 2 screws.

Torque : 2.4 Nm (24 kgf-cm, 21 in-lbf)

(c) Engage the claw and 2 pins to install the steering pad switch assembly (LH side) to the steering wheel sub-assembly.

(d) Install the 2 screws.

Torque : 2.4 Nm (24 kgf-cm, 21 in-lbf)

(e) Connect the steering pad switch connector to the spiral cable sub-assembly.

(f) Pass the wire harness over the 2 guides.





2. INSTALL HORN BUTTON ASSEMBLY

Installation