Steering Pad

SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: ON-VEHICLE INSPECTION

CAUTION:
Be sure to correctly follow the removal and installation procedures for the horn button assembly.

1. INSPECT HORN BUTTON ASSEMBLY (for Vehicle not Involved in Collision)

(a) Perform a diagnostic system check.

for Separate Type Yaw Rate Sensor: Separate Type Yaw Rate Sensor

for Built-in Type Yaw Rate Sensor: Built-in Type Yaw Rate Sensor

(b) Visually check for defects with the horn button assembly installed on the vehicle.

HINT
The defects are as follows:

* Cuts on the surface or in the grooves
* Small cracks on the surface or in the grooves
* Significant discoloration on the surface or in the grooves

OK:

No defects are found.

If any of the defects is found, replace the horn button assembly with a new one.

2. INSPECT HORN BUTTON ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)

(a) Perform a diagnostic system check.

for Separate Type Yaw Rate Sensor: Separate Type Yaw Rate Sensor

for Built-in Type Yaw Rate Sensor: Built-in Type Yaw Rate Sensor

(b) Visually check for defects with the horn button assembly removed from the vehicle.

HINT
The defects are as follows:

* Cuts on the surface or in the grooves
* Small cracks on the surface or in the grooves
* Significant discoloration on the surface or in the grooves
* Cracks or other damage to the connector
* Deformation of the steering wheel assembly
* Deformation of the horn button sub-assembly of the horn button assembly
* Interference or uneven clearance between the horn button assembly and steering wheel assembly when the new horn button assembly is installed on the steering wheel assembly

OK:

No defects are found.

If any of the defects is found, replace the horn button assembly or steering wheel assembly with a new one.