Reassembly

2AR-FE FUEL: FUEL PUMP: REASSEMBLY

1. INSTALL FUEL PUMP

(a) Apply gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.





Text in Illustration





(b) Engage the 5 claws of the fuel pump.





Text in Illustration





NOTICE:
* Make sure that the O-ring is not cut or pinched during the installation.
* Engage the claws securely.
* Do not remove the suction filter.

HINT
Perform "Inspection After Repair" after replacing the fuel pump assembly Programming and Relearning.

(c) Engage the 2 claws of the No. 1 fuel suction support.





(d) Connect the fuel pump harness connector.

(e) Engage the 2 claws of the No. 1 fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.





(f) Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the hose.





NOTICE:
Do not apply excessive force to the fuel tube or the suction support.

(g) Connect the connector of the fuel pump harness.

2. INSTALL FUEL SENDER GAUGE ASSEMBLY Installation