Removal

AXLE AND DIFFERENTIAL: REAR AXLE HUB: REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.

1. REMOVE REAR WHEEL

2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY Replacement

3. REMOVE PARKING BRAKE SHOE ADJUSTING HOLE PLUG Removal

4. REMOVE REAR DISC Removal

5. DISCONNECT SKID CONTROL SENSOR WIRE Removal

6. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY

(a) Remove the 4 bolts and the rear axle hub and bearing assembly from the rear axle carrier sub-assembly.





NOTICE:
Use wire or an equivalent tool to keep the parking brake assembly from hanging down by the parking brake cable assembly.