Reassembly

BRAKE SYSTEM (OTHER): BRAKE MASTER CYLINDER: REASSEMBLY

1. INSTALL MASTER CYLINDER RESERVOIR GROMMET

(a) Apply a light layer of lithium soap base glycol grease to the entire circumference of 2 new master cylinder reservoir grommets.

(b) Install the 2 master cylinder reservoir grommets to the brake master cylinder reservoir sub-assembly.

2. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

(a) Install the brake master cylinder reservoir sub-assembly to the brake master cylinder assembly.

3. INSTALL BRAKE MASTER CYLINDER STRAIGHT PIN

(a) Mount the brake master cylinder assembly in a vise.

NOTICE:
* Place aluminum plates on the vise to prevent damage to the brake master cylinder assembly.
* Do not drop the brake master cylinder reservoir sub-assembly.

(b) Using a pin punch and a hammer, tap in the brake master cylinder straight pin to secure the brake master cylinder reservoir sub-assembly.





4. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER

5. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY