Disassembly

BRAKE (FRONT): FRONT BRAKE: DISASSEMBLY

1. REMOVE FRONT DISC BRAKE PISTON

(a) Place a piece of cloth between the front disc brake piston and front disc brake cylinder assembly.

(b) Apply compressed air to remove the front disc brake piston from the front disc brake cylinder assembly.





CAUTION:
Do not place your fingers in front of the front disc brake piston when using compressed air.

NOTICE:
Do not allow any brake fluid to spatter.

2. REMOVE CYLINDER BOOT

(a) Using a screwdriver with its tip wrapped with vinyl tape, remove the cylinder boot from the front disc brake cylinder.





Text in Illustration





NOTICE:
Be careful not to damage the front disc brake cylinder.

3. REMOVE PISTON SEAL

(a) Using a screwdriver with its tip wrapped with vinyl tape, remove the piston seal from the front disc brake cylinder.





Text in Illustration





NOTICE:
Do not damage the inner surface or piston seal groove of the front disc brake cylinder.

4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

5. REMOVE FRONT DISC BRAKE BLEEDER PLUG