Installation

SEAT: REAR SEAT RECLINING CONTROL CABLE: INSTALLATION

1. INSTALL REAR SEATBACK LOCK ASSEMBLY LH (REAR SEAT LOCK CONTROL CABLE LH)

(a) Install the rear seatback lock assembly LH (rear seat lock control cable LH) with the 2 nuts.

Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)

(b) Engage the hook as shown in the illustration.





2. INSTALL REAR SEATBACK LOCK ASSEMBLY RH (REAR SEAT LOCK CONTROL CABLE RH)

HINT
Use the same procedure as for the LH side.

3. INSTALL ROOM PARTITION BOARD RH

(a) Engage the 5 clips to install the room partition board RH.

(b) Install the 2 clips.

4. INSTALL ROOM PARTITION BOARD LH

(a) Engage the 4 clips, 2 claws and guide to install the room partition board LH.

5. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY Installation

6. INSTALL REAR SEAT SHOULDER BELT COVER Installation

7. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER Installation

8. INSTALL CENTER STOP LIGHT SET Installation

9. INSTALL ROOF SIDE INNER GARNISH RH

HINT
Use the same procedure as for the LH side Installation.

10. INSTALL ROOF SIDE INNER GARNISH LH Installation

11. CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH Installation

12. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH Installation

13. CONNECT REAR SEAT OUTER BELT ASSEMBLY (for RH Side) Installation

14. CONNECT REAR SEAT OUTER BELT ASSEMBLY (for LH Side) Installation

15. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH Installation

16. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH Installation

17. INSTALL REAR SIDE SEATBACK ASSEMBLY RH Installation

18. INSTALL REAR SIDE SEATBACK ASSEMBLY LH Installation

19. INSTALL REAR SEATBACK ASSEMBLY RH Installation

20. INSTALL REAR SEATBACK ASSEMBLY LH Installation

21. INSTALL INNER LUGGAGE COMPARTMENT TRIM PAD Installation

22. INSTALL REAR SEAT CUSHION LOCK HOOK Installation

23. INSTALL REAR SEAT CUSHION ASSEMBLY Installation

24. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

25. INSPECT SRS WARNING LIGHT

for Separate Type Yaw Rate Sensor: Separate Type Yaw Rate Sensor

for Built-in Type Yaw Rate Sensor: Built-in Type Yaw Rate Sensor