Disassembly

EXTERIOR PANELS / TRIM: REAR BUMPER: DISASSEMBLY

1. REMOVE NO. 2 LUGGAGE ROOM WIRE (w/ Intuitive Parking Assist System)

(a) Disengage the 4 clamps.





(b) Disconnect the connector and remove the No. 2 luggage room wire.

2. REMOVE ULTRASONIC SENSOR CLIP (w/ Intuitive Parking Assist System) Removal

3. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System) Removal

4. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System) Removal

5. REMOVE REAR BUMPER SIDE RETAINER LH

(a) Remove the 3 screws.





(b) Disengage the 6 claws and remove the rear bumper side retainer LH.

6. REMOVE REAR BUMPER SIDE RETAINER RH

HINT
Use the same procedure as for the LH side.

7. REMOVE WHEEL HOUSE REINFORCEMENT LH

(a) Disengage the clip.

(b) Remove the screw.





(c) Remove the nut and wheel house reinforcement LH.

8. REMOVE WHEEL HOUSE REINFORCEMENT RH

HINT
Use the same procedure as for the LH side.

9. REMOVE REAR BUMPER ENERGY ABSORBER

(a) Disengage the 2 guides and remove the rear bumper energy absorber.





10. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY

(a) Remove the 6 nuts and rear bumper reinforcement sub-assembly.