Reassembly

U340E AUTOMATIC TRANSAXLE: TRANSAXLE REAR COVER: REASSEMBLY

1. INSTALL REAR TRANSAXLE COVER NEEDLE ROLLER BEARING





(a) Coat a new needle roller bearing with Toyota Genuine ATF WS or equivalent.

(b) Using SST and a press, install the needle roller bearing into the rear transaxle cover.

SST : 09950-60010

09951-00190

09952-06010

SST : 09950-70010

09951-07100

Standard clearance:

25.2 mm (0.992 in.)

2. INSTALL CLUTCH DRUM OIL SEAL RING





(a) Compress the oil seal ring from both sides to reduce dimension A.

Dimension A:

5.0 mm (0.197 in.)

(b) Coat the oil seal ring with Toyota Genuine ATF WS or equivalent and install it onto the rear transaxle cover.

3. INSTALL 2ND COAST AND OVERDRIVE O-RING





(a) Coat 2 new O-rings with Toyota Genuine ATF WS or equivalent and install them into the 2nd coast and overdrive brake piston.

NOTICE:
Do not damage the O-rings.

4. INSTALL 2ND COAST AND OVERDRIVE BRAKE PISTON





(a) Coat the piston with Toyota Genuine ATF WS or equivalent and install it into the transaxle rear cover.

NOTICE:
Do not damage the O-rings.

5. INSTALL OVERDRIVE BRAKE RETURN SPRING SUB-ASSEMBLY





(a) Using SST and a press, install the overdrive brake return spring and snap ring onto the transaxle rear cover.

SST : 09387-00070

NOTICE:
* Stop pressing the press when the spring sheet is lowered to 1 to 2 mm (0.039 to 0.078 in.) from the snap ring groove, to prevent the spring sheet from deforming.
* Do not expand the snap ring excessively.
6. INSTALL REAR TRANSAXLE COVER PLUG





(a) Coat 4 new O-rings with Toyota Genuine ATF WS or equivalent, and install them into the 4 rear transaxle cover plugs.

(b) Install the 4 rear transaxle cover plugs into the rear transaxle cover.

Torque : 7.4 Nm (75 kgf-cm, 65 in-lbf)

NOTICE:
Do not damage the O-rings.