Installation

BRAKE CONTROL: REAR SPEED SENSOR: INSTALLATION

1. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY Installation

2. INSPECT REAR AXLE HUB BEARING Component Tests and General Diagnostics

3. CONNECT SKID CONTROL SENSOR WIRE Installation

4. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY

5. ADJUST REAR DRUM BRAKE SHOE CLEARANCE Installation

6. INSTALL REAR WHEEL

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

8. CHECK VSC SENSOR SIGNAL (w/ VSC)

Test Mode Procedure

9. CHECK ABS SENSOR SIGNAL (w/o VSC)

Test Mode Procedure