Installation

BRAKE CONTROL: YAW RATE AND ACCELERATION SENSOR: INSTALLATION

1. INSTALL YAW RATE AND ACCELERATION SENSOR

(a) Connect the yaw rate and acceleration sensor connector.

(b) Install the yaw rate and acceleration sensor with the 2 bolts.

Torque : 14 Nm (143 kgf-cm, 10 ft-lbf)

2. INSTALL REAR CONSOLE BOX ASSEMBLY Installation

3. INSTALL CONSOLE BOX CARPET Installation

4. INSTALL REAR CONSOLE BOX COVER (for Hatchback) Installation

5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Sedan) Installation

6. INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY (for Hatchback Manual Transaxle) Installation

7. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for Sedan) Installation

8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

9. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL (for Sedan) Installation

10. PERFORM YAW RATE AND ACCELERATION SENSOR ZERO POINT CALIBRATION

Programming and Relearning.

11. CHECK VSC SENSOR SIGNAL

Test Mode Procedure.