Removal and Replacement

Starter:

Starter

REMOVAL

NOTE: Before changing the starter, check these items again:
- Connector connection
- Accessory installation

1. REMOVE BATTERY
2. REMOVE BATTERY TRAY
3. REMOVE AIR CLEANER ASSEMBLY
4. REMOVE AIR CLEANER BRACKET




a. Remove the 2 bolts and air cleaner bracket.

5. REMOVE AIR CLEANER INLET ASSEMBLY

a. Remove the 2 bolts and air cleaner inlet.

6. REMOVE STARTER ASSEMBLY




a. Disconnect the starter connector.
b. Remove the nut and disconnect the starter wire.
c. Remove the 2 bolts and starter.

INSTALLATION

1. INSTALL STARTER ASSEMBLY




a. Install the starter with the 2 bolts.

Torque: 39 N.m (398 kgf.cm, 29 ft.lbf)

b. Connect the starter wire with the nut.

Torque: 13 N.m (130 kgf.cm, 9 ft.lbf)

c. Connect the starter connector.

2. INSTALL AIR CLEANER BRACKET




a. Install the air cleaner bracket with the 2 bolts.

Torque: 12 N.m (122 kgf.cm, 9 ft.lbf)

3. INSTALL AIR CLEANER ASSEMBLY

Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)

4. INSTALL AIR CLEANER INLET ASSEMBLY

a. Install the air cleaner inlet with the 2 bolts.

Torque: 7.0 N.m (71 kgf.cm, 62 in.lbf)

5. CHECK CONNECTION OF VACUUM HOSE
6. INSTALL BATTERY TRAY
7. INSTALL BATTERY

a. Install the battery clamp with the bolt and nut.

Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)

b. Connect the cables to the battery terminals.

Torque: 3.5 N.m (36 kgf.cm, 31 in.lbf)

8. PERFORM INITIALIZATION