Oil Pan, Engine

Oil Pan Bolts 24 Nm (245 kgf-cm, 18 ft. lbs.)

Bolt Lengths
A 49 mm (1.93 inch)
B 88 mm (3.47 inch)
C 144 mm (5.67 inch)


No. 2 Oil Pan Bolts





a. Apply a continuous line of seal packing to the oil pan mating surface as shown in the illustration.
Seal packing: Toyota Genuine Seal Packing Black, Three Bond 1207B or Equivalent
Standard seal diameter 2.5 to 3.5 mm (0.098 to 0.14 inch)

NOTICE:
^ Remove any oil from the contact surface.
^ Install the oil pan within 3 minutes of applying seal packing.
^ Do not expose the seal to engine oil for at least 2 hours after installation.
^ Do not start the engine within 2 hours of installation.





b. Install the No. 2 oil pan with the 9 bolts and 2 nuts.
Torque 9.0 Nm (92 kgf-cm, 80 inch lbs.)
c. Install the drain plug with a new gasket.
Torque 37.5 Nm (382 kgf-cm, 28 ft. lbs.)