Crankshaft, Engine

Crankshaft Main Bearing Cap Bolts
First Pass 22 Nm (224 kgf-cm, 16 ft. lbs.)
Final Pass 90°

Connecting Rod Cap Bolts
First Pass 15 Nm (153 kgf-cm, 11 ft. lbs.)
Final Pass 90°

Crankshaft Pulley Bolt 128 Nm (1,305 kgf-cm, 95 ft. lbs.)

Connecting Rod Thrust Clearance
Standard 0.16 to 0.36 mm (0.0063 to 0.0142 inch)
Maximum 0.36 mm (0.0142 inch)

Reference:

Connecting Rod Oil Clearance
Standard 0.016 to 0.040 mm (0.0006 to 0.0016 inch)
Maximum 0.06 mm (0.0024 inch)

Crankshaft Bearing Oil Clearance
Standard 0.010 to 0.023 mm (0.0004 to 0.0009 inch)
Maximum 0.07 mm (0.0028 inch)





Cylinder Block Identification

Standard Cylinder Block Diameter:

Cylinder Block Diameter (Standard)

Standard Crankshaft Journal Diameter:

Crankshaft Journal Diameter (Standard)

Reference:

Reference