Curiosii for ever!: Car repair manuals for everyone.
Home >> Toyota >> 2007 >> Prius L4-1.5L (1NZ-FXE) Hybrid >> Repair and Diagnosis >> Hybrid Drive Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Hybrid Vehicle Control System >> Active Test

Active Test

ACTIVE TEST

NOTE: Beware that if the connector to the intelligent tester becomes disconnected or a communication error occurs during the ACTIVE TEST, the vehicle could become inoperative (READY light OFF).

HINT: Performing the ACTIVE TEST using the intelligent tester enables components including the relay, VSV, and actuator, to be operated without removing any parts.

Performing the ACTIVE TEST as the first step of troubleshooting is one method to shorten diagnostic time.

It is possible to display items in the DATA LIST during the ACTIVE TEST.

a. Connect the intelligent tester to the DLC3.
b. Turn the power switch ON (IG).
c. Turn the intelligent tester ON.
d. Enter the following menus: DIAGNOSIS / OBD/MOBD / HV ECU / ACTIVE TEST.
e. According to the display on the tester, perform the ACTIVE TEST.

Part 1:




Part 2:




pro multis · Curiosii