Shifter A/T: Testing and Inspection
ON-VEHICLE INSPECTION1. INSPECT SHIFT LEVER POSITION
(a) When shifting from the P to the R position with the ignition switch on (IG) and the brake pedal depressed, make sure that the shift lever moves smoothly and moves correctly into the position.
(b) Start the engine and make sure that the vehicle moves forward when shifting from the N to the D position and moves rearward when shifting to the R position. If operation cannot be done as specified, inspect the park/neutral position switch assembly and check the shift lever assembly installation condition.
INSPECTION
Switch Side:
1. INSPECT TRANSMISSION CONTROL SWITCH
(a) Measure resistance between each terminal of the shift lock control unit assembly when the shift lever is moved to each position.
Standard resistance:
If the resistance value is not as specified, replace the shift lock control ECU.