Camshaft Bearing

Camshaft Bearing Cap





Examine the front marks and numbers, and check that the order is as shown in the illustration. Then install the bearing caps into the cylinder head.





Using several steps, uniformly tighten the 10 bearing cap bolts in the sequence shown in the illustration.
Torque:
No. 1 Bearing cap 30 Nm (301 kgf-cm, 22 ft. lbs.)
No. 3 Bearing cap 9.0 Nm (92 kgf-cm, 80 inch lbs.)

NO. 2 CAMSHAFT





Examine the front marks and numbers, and check that the order is as shown in the illustration. Then install the bearing caps onto the cylinder head.





Using several steps, uniformly tighten the 10 bearing cap bolts in the sequence shown in the illustration.
Torque:
No. 2 Bearing cap 30 Nm (301 kgf-cm, 22 ft. lbs.)
No. 3 Bearing cap 9.0 Nm (92 kgf-cm, 80 inch lbs.)