Steering Column Lock: Service Precautions
ELECTRIC STEERING LOCKPRECAUTION
NOTICE: When the negative (-) battery cable is disconnected, initialize the following systems after the cable is reconnected.
1. PRECAUTIONS WHEN WORKING ON ELECTRIC STEERING LOCK
(a) After replacing the steering lock actuator assembly, perform the code registration.
(b) If checking for electric steering lock DTCs or checking the data list with the engine switch off, make sure that the driver's door is open.
HINT: When the engine switch is off, the body ECU to which the intelligent tester is to be connected may not be working. Communication with the intelligent tester is impossible if the body ECU is not working.
(c) If the steering lock ECU is replaced, open and close the driver's door. The engine may not start until either operation is performed.
HINT: Performing the above operation causes the steering lock ECU to memorize the correct steering lock bar position.