Transmission Installation

Part 1 Of 3:

Part 2 Of 3:

Part 3 Of 3:

INSTALLATION





1. CHECK TORQUE CONVERTER CLUTCH INSTALLATION
Using calipers and a straight edge, measure the distance from the installed surfaced of the transaxle housing to the torque converter clutch.
Correct distance: 9.3 mm (0.366 inch)
2. TRANSAXLE INSTALLATION
Installation is in the reverse order of removal.

HINT:
^ After installation, adjust the park/neutral position switch.
^ Fill ATF and check fluid level.
^ Do test to drive the vehicle.