Rear Seat
REMOVAL1. REMOVE SEAT CUSHION ASSEMBLY
Pull up the front portion of the seat cushion assembly, then remove it.
2. REMOVE SEATBACK ASSEMBLY LH AND RH
a. Release the seatback assembly, then fold the seatback assembly.
b. Remove the 3 clips.
c. Remove the 2 bolts and seatback assembly.
d. Employ the same manner described above to the other side.
3. REMOVE SIDE HINGE LH AND RH
Remove the bolts and side hinge LH and RH.
4. REMOVE CENTER HINGE
Remove the 2 bolts and center hinge.
INSTALLATION
1. INSTALL CENTER HINGE
Install the center hinge with the 2 bolts.
Torque: 19 N.m (195 kgf.cm, 14 ft.lbf)
2. INSTALL SIDE HINGE
Install the side hinges with the 2 bolts.
Torque: 19 N.m (195 kgf.cm, 14 ft.lbf)
3. INSTALL SEATBACK ASSEMBLY LH AND RH
a. Install the seatback assembly with the 2 bolts.
Torque: 19 N.m (195 kgf.cm, 14 ft.lbf)
b. Install the 3 clips.
c. Employ the same manner described above to the other side.
4. INSTALL SEAT CUSHION ASSEMBLY
a. Install the seat inner belt through the seat cushion assembly.
b. Push down the front portion of the seat cushion to install the hook to the body panel.
HINT: Confirm that the seat cushion is installed firmly.