EGR Valve: Service and Repair

REMOVE EGR VALVE
a. Remove the EGR pipe.
Remove the 4 nuts, EGR pipe and 2 gaskets.

HINT: Install 2 new gaskets.

Torque: 12 N.m (120 kgf.cm, 9 ft.lbf)

b. Disconnect the EGR gas temperature sensor connector and clamp.




c. Remove the EGR valve.
1. Disconnect the EVAP hose from the EGR valve hook.
2. Disconnect the vacuum hose from the EGR valve.
3. Disconnect the EGR valve position sensor connector.

d. Remove the 3 nuts, EGR valve and gasket.

HINT: Install a new gasket.

Torque: 12 N.m (120 kgf.cm, 9 ft.lbf)


REINSTALL EGR VALVE
Installation is the reverse order of removal.