Knock Sensor: Testing and Inspection

INSPECTION




1. REMOVE KNOCK SENSOR 1
a. Disconnect the knock sensor connector.
b. Using SST, remove the knock sensor.
SST 09816-30010




2. INSPECT KNOCK SENSOR 1
Using an ohmmeter, check that there is no continuity between, the terminal and body.
If there is continuity, replace the sensor.

3. REINSTALL KNOCK SENSOR 1
a. Using SST, install the knock sensor.
SST 09816-30010

Torque: 44 N.m (450 kgf.cm, 32 ft.lbf)

b. Connect the knock sensor connector.