Service Hints

C 3 CRUISE CONTROL ACTUATOR
3-4 : Approx. 38.5 Ohms

C 16 CRUISE CONTROL SW [COMB. SW]
5-3 : Continuity with the CRUISE SW ON
4-3 : Approx. 418 Ohms with the CANCEL SW ON
Approx. 68 Ohms with the RESUME/ACCEL SW ON
Approx. 198 Ohms with the SET/COAST SW ON

C 19 CRUISE CONTROL ECU
9-GROUND : 10-16 Volts with the ignition SW at ON position
12-GROUND : 4 pulses with 1 rotation of the rotor shaft
10-GROUND : Approx. 418 Ohms with the CANCEL SW ON in the control SW
Approx. 198 Ohms with the SET/COAST SW ON in the control SW
Approx. 68 Ohms with the RESUME/ACCEL SW ONin the control SW
16-GROUND : Always continuity