Removal and Installation

ON-VEHICLE INSPECTION

NOTE: Before changing the starter, check the following items again:
- Connector connection
- Accessory installation, e.g.: theft deterrent system










COMPONENTS

REMOVAL

1. REMOVE BATTERY AND TRAY

2. w/ CRUISE CONTROL SYSTEM:
REMOVE CRUISE CONTROL ACTUATOR
a. Disconnect the actuator connector and clamp.
b. Remove the 3 bolts, and disconnect the actuator with the bracket.

3. REMOVE STARTER
a. Disconnect the starter connector.
b. Remove the 2 bolts, throttle cable clamp (A/T) and starter.
c. Remove the nut, and disconnect the starter wire.

Torque: 37 Nm (380 kgf.cm, 27 ft.lbf)

INSTALLATION

Installation is in the reverse order of removal.