Manual A/C
DISASSEMBLY1. REMOVE A/C SWITCH AND DEFOGGER SWITCHES
Using a screwdriver, release the claw and pull out the switch backward.
HINT: Tape the screwdriver tip before use.
2. REMOVE KNOBS
3. REMOVE HEATER CONTROL NAME SHEET
a. Remove the 2 screws.
b. Using a screwdriver, release the 4 claws and heater control name sheet.
HINT: Tape the screwdriver tip before use.
4. REMOVE HEATER BLOWER SWITCH
a. Remove the bulb.
b. Disconnect the bulb holder.
c. Remove the 2 screws and pull out the switch.
5. REMOVE HEATER SWITCH
Remove the 2 screws and pull out the switch.
6. REMOVE AIR MIX DAMPER [1][2]CONTROL CABLE
a. Set temperature control dial to "MAX," "COOL" position.
b. Remove the 2 screws and heater control.
c. Using a screwdriver, open the claws of outer cable clamp and disconnect outer cable.
HINT: Tape the screwdriver tip before use.
d. Remove the [1][2]control cable.
REASSEMBLY
1. INSTALL AIR MIX DAMPER [1][2]CONTROL CABLE
a. Insert the inner cable to control lever.
b. Push the outer cable and clamp the outer cable.
c. Install the heater control with the 2 screws.
2. INSTALL HEATER SWITCH
Install the switch with the 2 screws.
3. INSTALL HEATER BLOWER SWITCH
a. Install the switch with the 2 screws.
b. Connect the bulb holder.
c. Install the bulb.
4. INSTALL HEATER CONTROL NAME SHEET
Install the heater control name sheet with the 2 screw.
HINT: After installation, check the fitting for claws.
5. INSTALL KNOBS
6. INSTALL A/C SWITCH AND DEFOGGER SWITCH