Rear

1. Measure the vehicle height.

NOTE: Before inspecting the wheel alignment, adjust the vehicle height to the specification.

2. Inspect the camber.
The camber measurement should be -0°30' ± 45' (-0.5° ± 0.75°).
The Left-right error should be 45' (0.75°) or less.

NOTE: The camber is not adjustable, if the measurement is not within the specification, inspect and replace the suspension parts as necessary.

Measuring Point Reference:

3. Inspect the toe-in. The toe-in (totals) are as follows.

A + B: 0°20' ± 20' (0.33° ± 0.33°)
C - D: 3.4 ± 3.4 mm (0.13 ± 0.13 inch).

NOTE: Toe-in is not adjustable, if the measurement is not within the specification, inspect and replace the suspension parts as necessary.