Shift Cable: Adjustments

SHIFT CABLE ADJUSTMENT

- When shifting the shift lever from the N position to the other positions, check that the lever can be shifted smoothly and accurately to each position and that the position indicator correctly indicates the position.
- If the indicator is not aligned with the correct position, carry out the following adjustment procedures:





- Loosen the swivel nut on the manual shaft lever.
- Push the control shaft lever fully toward the right side of the vehicle.





- Return the control shaft lever 2 notches to the N position.
- Set the shift lever to N position.
- While holding the shift lever lightly toward the R position side, tighten the shift lever nut.

Torque: 13 N.m (135 Kgf.cm, 10 ft.lbf)