Electrical Specifications

TIMING:

Base Ignition Timing 10° BTDC At Idle [1]
Advance Ignition Timing 0 - 20° BTDC At Idle [1]

[1] Refer to ADJUSTMENT PROCEDURES.

RESISTANCE:

Ignition Coil:
Primary (cold) 1.28 - 1.56 Ohms
Secondary (cold) 10.4 - 14.0 kOhms

Distributor Signal Generator;
Between terminals G1 and G- 140 - 180 Ohms
Between terminals Ne and G- 140 - 180 Ohms

Coolant Temperature and Air Temperature Sensors:
At -4°F (-20°C) 10 - 20 kOhms
At 32°F (0°C) 4 - 7 kOhms
At 68°F (20°C) 2 - 3 kOhms
At 104°F (40°C) 0.9 - 1.3 kOhms
At 140°C (60°C) 0.4 - 0.7 kOhms
At 176°F (80°C) 0.2 - 0.4 kOhms

Throttle Position Sensor:

THROTTLE OPENING ANGLE CLEARANCE BETWEEN BETWEEN TERMINALS
(from vertical) STOP SCREW AND LEVER IDL - E2 PSW - E2

-- 0.024in.(0.60mm) C NC
-- 0.032in.(0.80mm) NC NC
Fully opened -- NC C
63° -- NC NC
69° -- NC C
7.5° or less -- C NC

C=continuity
NC=no continuity