System Specifications

Firing Order 1-3-4-2

Idle Speed 800 rpm [1]
Idle Mixture [1]

[1] Not Adjustable.

Port Fuel Injector Volume 80 - 100cc (4.9 - 6.1 cu in.) per 15 sec.

Supercharger Magnetic Clutch Air Gap 0.0138 - 0.0256 in. (0.35 - 0.65 mm)

EFI TIGHTENING TORQUE:

Air Connector To Throttle Body 7 ft.lbs. (10 N-m)
Cold Start Injector Fuel Pipe 13 ft.lbs. (18 N-m)
Cold Start Injector Mounting Bolts 5.4 ft.lbs. (7.4 N-m)
Filler Pipe Flange To Tank Bolts 2.5 ft.lbs. (3.4 N-m)
Fuel Lines To Fittings 22 ft.lbs. (30 N-m)
Fuel Pressure Regulator To Fuel Rail 5.4 ft.lbs. (7.4 N-m)
Fuel Pressure Pulsation Damper To Fuel Rail 22 ft.lbs. (29 N-m)
Fuel Pump Bracket To Tank 2.5 ft.lbs. (3.4 N-m)
Fuel Rail Mounting Bolts 13 ft.lbs. (17 N-m)
Tank Strap Upper Mounting Bolts 14 ft.lbs. (19 N-m)
Tank Strap Lower Mounting Nuts 10 ft.lbs. (14 N-m)
Throttle Body To Intake Plenum Bolts 16 ft.lbs. (22 N-m)

SUPERCHARGER TIGHTENING TORQUE:

Air Inlet Duct Stay (Duct Side) 16 ft.lbs. (22 N-m)
Air Inlet Duct Stay (Block Side) 29 ft.lbs. (39 N-m)
Clutch Flange To Housing 3.6 ft.lbs. (4.9 N-m)
Clutch Pulley Ring Nut 18 ft.lbs. (25 N-m)
Clutch Hub Nut 14 ft.lbs. (20 N-m)
No.1 Air Inlet Duct To Intake Manifold 14 ft.lbs. (19 N-m)
No.1 Air Outlet Duct To Housing 7 ft.lbs. (10 N-m)
No.2 Air Inlet Duct To Housing 6.8 ft.lbs. (9.4 N-m)
Rear Plate To Housing Bolt 3.6 ft.lbs. (4.9 N-m)
Rear Plate To Housing Nut 36 ft.lbs. (49 N-m)
Rear Cover To Rear Plate 3.6 ft.lbs. (4.9 N-m)
Supercharger To Intake Manifold 25 ft.lbs. (34 N-m)
Supercharger To Bracket 47 ft.lbs. (64 N-m)