Speed Sensor

REMOVAL OF SPEED SENSOR




1. DRAIN 0.7 LITERS OF ATF FROM DIFFERENTIAL
2. REMOVE LH DRIVE SHAFT




3. REMOVE BOLTS AND BRACKET
4. DISCONNECT SPEED SENSOR CONNECTOR




5. REMOVE SPEED SENSOR AND O-RING

INSPECTION OF SPEED SENSOR




INSPECT SPEED SENSOR
Connect an ohmmeter to speed sensor and check that the meter deflects when the sensor is repeatedly brought close to a magnet and removed from it.

INSTALLATION OF SPEED SENSOR




1. INSTALL AND COAT NEW O-RING WITH ATF
2. INSTALL SPEED SENSOR
3. CONNECT SPEED SENSOR CONNECTOR




4. INSTALL BRACKET AND BOLTS




5. INSTALL LH DRIVE SHAFT
6. FILL DIFFERENTIAL WITH ATP
a. Add 0.7 liters (0.7 US qts, 0.6 Imp. qts) of ATF.
b. Check the differential fluid level.