Current Part Numbers

CURRENT PART NUMBERS (NEW STYLE BEARING)

ROD BEARINGS

PART# SIZE

13041-42010-01 1
13041-42010-02 2
13041-42010-03 3
13041-42010-04 4
13041-42010-05 5
13204-42010 0.25 Undersize (Bearing Set)
13205-42010 0.50 Undersize (Bearing Set)

#1 MAIN BEARING

PART# SIZE

11071-43010-01 1
11071-43010-02 2
11071-43010-03 3
11071-43010-04 4
11071-43010-05 5

#2 - #7 MAIN BEARING

PART# SIZE

11701-43010-01 1
11701-43010-02 2
11701-43010-03 3
11701-43010-04 4
11701-43010-05 5
11704-43010 0.25 Undersize (Bearing Set: 1-7)
11705-43010 0.50 Undersize (Bearing Set: 1-7)

NOTE:

The larger the size number, the more undersized the bearing. For example, a #5 bearing fits a smaller crankshaft journal than a #3 bearing.
CURRENT PART NUMBERS (OLD STYLE BEARING)

ROD BEARINGS SETS

PART# SIZE

13202-45011 STD
13003-45011 0.05" Undersize
13204-45011 0.25 "
13205-45011 0.50 "

MAIN BEARING

PART# SIZE

11702-45011 STD
11703-45011 0.05 Undersize
11704-45011 0.25 "
11705-45011 0.50 "


NOTE: When replacing main and/or rod bearing inserts in an engine built prior to the new sizing system (approximately 6/84), the above bearings must be used. The indexing tab location was reversed on the rods and number one main bearing when the new bearing style was introduced.


CONNECTING ROD


All connecting rods supplied through the parts system come with a bearing. Use the bearing supplied with the connecting rod. Be sure to check the oil clearance with plastigauge to insure proper clearance.