Cylinder Head
CYLINDER HEAD SUB-ASSEMBLY LHApply a light coat of engine oil to the threads and under the heads of the cylinder head bolts.
Step 1:
- Using a 10 mm bi-hexagon wrench, install and uniformly tighten the 10 cylinder head bolts with the plate washers in several steps, in the sequence shown in the illustration.
Torque: 36 Nm (367 kgf-cm, 27 ft-lbf)
Step 2:
- Mark each cylinder head bolt head with paint as shown in the illustration.
- Tighten the cylinder head bolts another 90° in the sequence shown in step 1.
Step 3:
- Tighten the cylinder head bolts an additional 90° in the sequence shown in step 1.
- Check that the painted marks are now facing rearward.
Install and uniformly tighten the 2 bolts in the sequence shown in the illustration.
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf)
CYLINDER HEAD SUB-ASSEMBLY RH
Apply a light coat of engine oil to the threads and under the heads of the cylinder head bolts.
Step 1:
- Using a 10 mm bi-hexagon wrench, install and uniformly tighten the 10 cylinder head bolts with the plate washers in several steps, in the sequence shown in the illustration.
Torque: 36 Nm (367 kgf-cm, 27 ft-lbf)
Step 2:
- Mark each cylinder head bolt head with paint as shown in the illustration.
- Tighten the cylinder head bolts another 90° in the sequence shown in step 1.
Step 3:
- Tighten the cylinder head bolts an additional 90° in the sequence shown in step 1.
- Check that the painting marks are now facing rearward.
Install and uniformly tighten the 2 cylinder head bolts.
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf)