Installation

2TR-FE EMISSION CONTROL: CANISTER:

INSTALLATION

1. INSTALL CHARCOAL CANISTER ASSEMBLY
(a) Connect the fuel tank vent hose.
(1) Align the fuel tank vent hose connector with the pipe, then push in the fuel tank vent connector until the retainer makes a "click" sound to connect the fuel tank vent hose to the charcoal canister.

NOTICE:
- Check that there are no scratches or foreign objects on the disconnected parts of the fuel tank vent connector and pipe before performing the work.
- After connecting the fuel tank vent hose, check that the fuel tank vent hose is securely connected by pulling the quick connector.

(b) Install the charcoal canister with the bolt and 2 nuts.
Torque: 20 Nm (204 kgf-cm, 15 ft-lbf)
(c) Connect the EVAP tube.
(d) Connect the connector.
2. INSTALL CHARCOAL CANISTER FILTER NO.2
(a) Install the charcoal canister filter No. 2 with the nut.
Torque: 20 Nm (204 kgf-cm, 15 ft-lbf)
(b) Connect the breather hose to the charcoal canister.
(c) Engage the clamp.
(d) Connect the breather hose to the pipe.
(e) Connect the EVAP pipe to the clamp.
(f) Install the ABS wire harness clamp with the bolt.
Torque: 14 Nm (142 kgf-cm, 10 ft-lbf)
3. INSTALL FUEL TANK ASSEMBLY (Installation)

4. CONNECT FUEL TANK MAIN TUBE AND FUEL TANK RETURN TUBE (Installation)

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)
6. CHECK FOR FUEL LEAKAGE (Testing and Inspection)