Camshaft Bearing

CAMSHAFT SUB-ASSEMBLY LH





Install the camshaft housing, and install the 18 bolts in the order shown in the illustration.

Bolt A
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)

Except bolt A
Torque: 30 Nm (306 kgf-cm, 22 ft-lbf)

NOTE: Make sure that the knock pin of the camshaft is positioned as shown in the illustration before installing the camshaft housing.





Tighten the 10 bolts in the order shown in the illustration.
Torque: 16 Nm (163 kgf-cm, 12 ft-lbf)
NOTE: Thoroughly wipe clean any seal packing.

CAMSHAFT SUB-ASSEMBLY RH




Install the camshaft housing, and install the 18 bolts in the order shown in the illustration.

Bolt A
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)

Except bolt A
Torque: 30 Nm (306 kgf-cm, 22 ft-lbf)

NOTE: Make sure that the knock pin of the camshaft is positioned as shown in the illustration before installing the camshaft housing.





Tighten the 10 bolts in the order shown in the illustration.
Torque: 16 Nm (163 kgf-cm, 12 ft-lbf)
NOTE: Thoroughly wipe clean any seal packing.